Realme c51 frp lock remove by unlock tool
[SPRD] FACTORY RESET Selected Platform : Tiger T616_64_Bypass
Connect Testpoint or hold VOL DOWN! Instruction here!
Waiting for device... COM28 (SPRD U2S Diag)
USB : USB\VID_1782&PID_4D00\6&2F07A7CE&0&2
Initializing loader... OK
Protocol : SPRD3
Sending payload... OK
Sending auth data... OK
Sending preloader1... OK
Sending preloader2... OK
Booting loader, please wait... OK
Boot ver: Spreadtrum Boot Block version 1.1
Sending FDL1... OK
Sending FDL2... OK
Reading Serial Number... N.A
Reading partitions info... OK [78] [1024]
Dual boot-slot : A
Reading device info... SKIP [EROFS]
Erasing FRP (persist)... OK
Erasing USERDATA... OK
UNLOCKTOOL 2024.11.15.0
Elapsed time : 20 seconds
Tools Need
1 Unlock Tool Examples include Spd Flash Tool, UMT, MRT, Octoplus FRP, or similar tools compatible with Realme devices.
2 USB Drivers Install Realme USB drivers on your computer
3 Firmware/Scatter File Ensure you have the correct firmware or scatter file for Realme C51
4 USB Cable A good-quality USB cable to connect the phone to the computer
teps to Remove FRP Lock
1 Install USB Drivers
Download and install the Realme USB drivers on your PC to ensure proper communication with the device
2 Download and Set Up Unlock Tool
Choose a compatible unlock tool (etc SPD Flash Tool, MRT, UMT)
Extract the tool files and install them on your computer.
Boot the Device into
Power off the Realme C51
Use the key combination Volume Up + Power or Volume Down + USB connection to boot the device into auto mode
- Alternatively, use test point methods if the key combinations don't work. (Refer to the hardware guide for the Realme C51 test point
4 Load the Firmware/Scatter File Pac File
Open the unlock tool and load the Realme C51 firmware or pac file
Remove FRP Lock
In the unlock tool interface, look for the FRP Reset option
Select the connected device and execute the FRP reset process.
The tool will bypass the FRP lock and prompt you when completed
realme c51 frp bypass Go Link
Comments
Post a Comment